HLK5M05 AC-DC Isolated Power Supply Module

৳ 390.00

HLK5M05 AC-DC Power Supply Module BD

220V 5V AC-DC Isolated 5W Power Supply Module.
The 5W ultra-small series module power supply is a small-volume, high-efficiency AC DC power module supply designed by Shenzhen Hi-Link Electronics Co.,Ltd. It has the advantages of global input voltage range, low temperature rise, low power consumption,high efficiency, high reliability and high safety isolation. It has been widely used in smart home, automation control, communications equipment, instrumentation and other industries.



AC-DC isolated power supply module 220V 5V. Switching Step-Down 5W Power Module.

  • 1. Meet UL, CE requirements,
  • 2. Ultra-thin, ultra-small
  • 3. All voltage input (AC: 90 ~ 240V)
  • 4. Low ripple and low noise
  • 5. Output overload and short circuit protection
  • 6. High efficiency, high power density
  • 7. The product is designed to meet the requirements of EMC and Safety Test
  • 8. Low power consumption, environmental protection, no-load loss <0.1W
  • 9.100% load aging and testing

Environment Condition

Item Name Technical Criteria   Unit
Operation Temperature -20—+60 Centigrade
Store Temperature -40—+80 Centigrade
Relative humidity 5—95 %
Cooling way Cooling by radiation
Atmospheric pressure 80—106 Kpa
Sea level elevation ≤2000 m
Vibration Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes

Electrical Characteristic:

Item Name Technical Criteria Unit
Rated input voltage 100-240 VAc
Input voltage range 90-240 VAc
Maximum input current ≤0.2 A
Input current surge ≤10 A
maximum input voltage ≤270 VAc
Enter slow start ≤50 mS
Input Low Voltage Efficiency Vin=110VAc,Output full-load≥69 %
Input High Voltage Efficiency Vin=220VAc,output full-load≥70 %
Long-term reliability MTBF≥100,000 h
Load rated output voltage +5±0.1 VDc
Full rated output voltage +5±0.2 VDc
Short-term maximum output current ≥1200 mA
The maximum output current for a long time ≥1000 mA
Voltage Regulation                                                                          ±0.2 %
Load Regulation                                                                           ±0.5 %
Output ripple and noise(mVp-p) ≤70Rated input voltage, full load. Using 20MHz of bandwidth,

The load side 10uF and 0.1uF capacitor to be tested.

Switch overshoot amplitude (Rated input voltage and output load plus 10%)≤5 %VO
Output over-current protection 150-200% of the output maximum load A
Output short circuit protection Direct short circuit at the normal output, automatically resume normal operation after a short circuit removal